Skip to content

Bridge Settings

Manage all connected bridges or add new bridges to Audectra.

Bridge Settings

In here, all your configured bridges are listed. The listing includes the bridge names, their type, their connection address, the configured protocol and the number of channels. The small green dot on the left side of of the bridge name indicates, if at least one channel of the bridge is in use by a loaded project, otherwise it is red.

Add new Bridge

Add a new bridge by clicking the "Add" button on the right side. This will open the bridge wizard, which will guide you through the process.

Remove Bridge

Remove a bridge by selecting it in the list and clicking on the "Remove" button on the right side.

Warning

If at least one channel of the selected bridge is in use by one or more loaded projects, you cannot remove it before closing these projects.

Edit Bridge

If you need to change the connection settings or the name of the selected bridge, click on the "Edit" button on the right side.

Tip

You can also rename a bridge in-place by double clicking on its name in the bridge settings.