Skip to content

Project Tree

Located at the left side under the project render preview the project tree gives you an easy access to all loaded projects and their states.

Project Tree

Projects, states and patches are collapsible in the project tree.

Enabled/Disabled Rendering

The small green dot on the right side of the project name shows that rendering is enabled for this project. If it were disabled, it would be red.

Project States

Each state of a project is listed under the corresponding "States" node of the project. The currently active state is marked with a small dot on the left side of the state name.

Render Patches

All render patches of a project are listed under the "Patches" node. The name consists of the bridge name and channel number assigned to the render patch.

Context Menu

With a project or state selected, right click on the project tree to open the context menu, which will give you easy access to many common work-steps described below.

Add State to Project

Add a new state to the currently selected project by clicking on "Add new State" in the context menu. This will add a new generally named state to the project, which you can easily rename by following the steps below.

Add Patch to Project

Click on "Add new Patch" in the context menu to open the patching wizard, which will guide you through the process of creating a new render patch for the currently selected project.

Remove State

You can remove the selected state by clicking on "Delete" in the context menu.

Info

You are not able to remove an active state.

Rename Project

Rename the selected project by clicking on "Rename" in the context menu. This will allow you to modify the project name in-place.

Rename State

Rename the selected state by clicking on "Rename" in the context menu. This will allow you to modify the state name in-place.

Set Current State

To manually set the selected state as active, click on "Set Current State" in the context menu.

Info

After manually switching to a state, all its transitions will be evaluated as well. Thus, if your state does not stay active, check your transitions.

Enable Rendering

Enable rendering for the selected project.

Info

Rendering is enabled by default for newly created projects.

Disable Rendering

Disable rendering for the selected project.

Save Project

Save the selected project by clicking on "Save Project" in the context menu and setting the filename and path.

Close Project

Close the selected project by clicking on "Close Project" in the context menu. This will automatically reset all associated render patches to black.

Open Project Properties

Open the properties or settings for the currently selected project by clicking on "Project > Properties".

Project properties

This dialog allows you to set the project brightness and target frame rate.